A SIMPLE EXPLANATION: Corrosion simply stated is a natural phenomenon which destroys most metals by either a chemical or electrochemical reaction. The metal is converted, usually with the help of an electrolyte, into a stable metallic compound such as an oxide, hydroxide, or sulfate. The rate at which metals corrode depends greatly on the environment they are exposed to, and the amount of preventive maintenance they receive. Metals that are exposed to marine atmospheres, moisture, tropical temperatures, and industrial chemical atmospheres have the highest rate of corrosion. The tendency of metals to corrode creates a serious problem causing loss of value, safety and functionality in our investments.    More>>

Corrosion Block ANTI-CORROSION FORMULA HOW IT WORKS: Corrosion Block anti-corrosion compound is a state-of-the-art material developed exclusively for the marine industry.

Corrosion Block has four superior features:
1. It is a superior anti-corrosion compound.
    • It kills existing corrosion in progress.
    • It prevents new corrosion cells from forming for 12-18 months.
2. It is an excellent penetrant.
3. lt is an excellent light lubricant.
4. It is non conductive and is widely used to protect electronics.
Corrosion cells act as miniature batteries, feeding the transfer of ions as long as oxygen-providing moisture is present. If you remove the water from a battery it cannot function. Likewise, If you remove the moisture from the corrosion cell, the corrosion process will stop.

Other anti-corrosion products actually seal moisture in as the film which is often wax based sets hard.

Corrosion Block can be described as a clean, clear, ultra-thin fluid which leaves a non-greasy atmospheric barrier to protect the base metal on interior surfaces. Corrosion Block leaves no gummy residue because it contains no wax, resin, tar, asphalt, silicone or Teflon. It can be sprayed, or wiped on with a damp rag,  The Corrosion Block will actively penetrate the corrosion on the surface of the metal and, in the process, isolate it electrically
from the base metal. Once the Corrosion Block has penetrated into the corrosion
cell it displaces and/or emulsifies and encapsulates any moisture present in the cell and bringing it to the surface where it evaporates. The Corrosion Block then fills the cell, creating a 40 KV dielectric barrier to prevent further moisture contact with the base metal for up to 18 months.  More>>